Table saw maintenance checklist (Updated)

Table saw is a powerful woodworking tool that helps woodworkers to make precise and multipurpose cuts is varied positions. Table saw needs appropriate maintenance in order to a long run of work for several years, like all other tools.


In this blog, I’m going to share with you how to maintain the table saw. You guys might be worried about this task. But trust me, this is a super easy task. And here I’m going to describe you step by step about the table saw maintenance checklist. So, let’s start!

You can read Table saw Review On WoodworkerHelp.Com

Maintenance of table saw:

1.    Set a schedule after purchasing your table saw and follow it for maintenance. Actually, you may know, maintenance is including oiling, greasing and changing of parts as and when need to require. The maintenance plan may vary depending upon the usage of your table saw. Basically, you should change the table saw belt every year. And check for adjustments, tightening and so on before and after use or during lubrication and cleaning.

2.    Cleaning the dust away from the saw regularly. You can choose either a dust collector or vacuum for the exhaustion of dust. You need to clean all the movable parts of the table saw.

3.    Check every part of the saw. Parts of a table saw are bolted and screwed with each other. And while using, it vibrates and those screws and bolts may cause loosen up from their place. So you need to tighten them because alignment and adjustment are important to avoid danger.

4.    The blade of the saw must be sharp for effective cutting performance. The table saw will unable to cut effectively if the blade is dull. Even a dull blade can be dangerous or may cause any misalignment. And one more thing, you should hire a professional person for sharping the blade. The blade must be clean and safe. And especially at the time of replacing the blade of a table saw special care should be taken.

5.    All type of replacement should be taken according to the instructions those given by the manufacturer in manual. You have to avoid using the saw till the replacements are completed. 

6.    Always keep the table saw clean and the table top as well.

7.    Cleaning the motor and gear of the table saw regularly and properly.

In this section, I’ve highlighted some basic important rules that must be followed for good maintenance, operation and use of a table saw. Appropriate maintenance engages its ability at all times and gives the best service. In this way, you can enhance the longevity of its different parts. As a result, it saves money and time. And safety measures must be taken while using this helpful and wonderful tool.

Summing Up

Hope, this table saw the maintenance checklist has helped you a lot to exhibit an appropriate maintenance checklist. That’s all for today’s content, friends! And my last suggestion is to store your table saw in a secure, clean and stable place when it not in use. So, guys, I hope this instruction will be effective for you all. Let me know your opinion in the comments section! Let us know what you think and be sure to share these great ideas with your family and loved ones! 

Thanks for being with us!